Connecting to your network
Last updated
Last updated
Ethernet or Wi-Fi network connection
Minimum internet connection of 3 Mb/s upload and download per robot
Any custom network settings (check with your IT Manager)
Learn more about network requirements here.
Remove robot from box and take out the foam inside, securing the camera
Plug-in power to robot, and if using, Ethernet cable from robot to network
Wait until the indicator lights change from pulsing white to: Steady Orange Robot has connected to the internet and is ready to start a job at discovery.reshapebiotech.com Pulsing Blue Look for the label on the right side of your robot (example below). Then, connect your phone or computer to your robot’s WiFi network, as shown on the label. In your browser, go to http://10.42.0.1/ and follow the setup guide.
During setup, you will lose access to your robot when it attempts to connect to your network. If a pulsing blue light is shown, reconnect to its Wi-Fi with your computer or phone and check your settings.
A steady orange light when connected to the internet.
After successfully setting up your robot, it will show a pulsing blue light if it loses its internet connection. While the light is pulsing blue, you can access its WiFi network to troubleshoot.
